Samsung CLP-510 Series Setup Manual page 67

2.14 U C
SING THE ONTROL
Item
Netware
Config Netware
IPX Frame Type
Reset Network
Default Set
Print Net CFG
P
ANEL
Explanation
Options: On*, Off
You can select whether or not to use the
Netware protocol.
If you select On, you can access the
Config Netware menu item.
Config Netware menu, you can
In the
specify the frame type parameter used
on your network.
Options: Yes, No*
You can set this item only when you set
Netware to On . This item lets you
select whether or not you set the frame
type parameter. Select
frame type.
Yes , the IPX Frame Type
If you select
option appears on the display.
Values: Auto*, EN_8022, EN_8023, EN_II,
EN_SNAP
You can select this item only when you
set Config Netware to Yes. This item
lets you select the IPX Frame Type.
• Auto: You can set the frame type
automatically.
• EN_8023: Select this value to use the
IEEE 802.3 frame type.
• EN_II: Select this value to use the
ETHERNET II frame type.
• EN_8022: Select this value to use the
IEEE 802.2 frame type.
• EN_SNAP: Select this value to use the
SNAP frame type.
This item reboots the network interface
card.
This item performs a simple reset and
restores the factory default for the
network configuration.
This item prints a page showing the
network parameters you set.
Yes to select the