Samsung CLP-510 Series Setup Manual page 237

C.14 U Y P
SING OUR RINTER ON A
• Encryption: "None", "64-bit WEB", or "128-bits WEB".
Default setting is "None". If your network uses WEP
encryption keys, you must configure the encryption keys. You
can configure up to four keys. The active key must match the
value and active key position (for example, Key 1) configured
on other wireless devices.
• Using Key: Select the key to use in your network.
• Key Type: Select the key type of your network.
• Key 1, Key 2, Key 3, Key 4: Enter the key number for
"Encryption". The numbers you can enter are as follows:
64-bit WEP
128-bit WEP
N
ETWORK
Hexadecimal
10 digits
26digits
Alphanumeric
5 characters
13 characters