Setting Up A Network-Connected Printer; Configuring Network Parameters On The Control Panel; Supported Operating Systems - Samsung CLP-510 Series Setup Manual

C.6
U Y P
SING OUR RINTER ON A

Setting Up a Network-Connected Printer

You have to set up the network protocols on the printer to use
it as your network printer. Setting protocols can be
accomplished by using the supplied network program. Please
refer to SyncThru User's Guide.
You can configure the basic network parameters through the printer's
control panel. Use the printer control panel to do the following:
• Enable or disable network protocols (IPX/SPX)
• Configure TCP/IP
• Configure IPX frame types
Configuring Network Parameters on the
Control Panel

Supported Operating Systems

N
: The operating systems supported by the network card may
OTE
be different than the operating systems supported by the printer.
The following table shows the network environments supported by
the printer.
Item
Network Interface
Network Operating
System
Network Protocols
Dynamic Addressing
Server
• IPX/SPX: Internet Packet eXchange/Sequenced Packet eXchange
• TCP/IP: Transmission Control Protocol/Internet Protocol
• DLC/LLC: Data Link Control/Logical Link Control
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol
N
ETWORK
Requirements
10/100 Base-TX (standard for CLP-510N)
or 802.11b Wireless LAN
• Novell NetWare 4.x, 5.x, 6.x
• Windows 95/98/Me/NT 4.0/2000/2003/XP
• Various Linux OS
• Macintosh OS 10.3.x
• Netware IPX/SPX
• TCP/IP, DLC/LLC on Windows
DHCP, BOOTP