Samsung CLP-510 Series Setup Manual page 195

Message
Jam
Inside Printer
Lever Unlocking
Error
Press
Continue Button
Load
[Size] In Tray1
Load
[Size] In Tray2
Load
[Size] In MP
Main Motor
Error
Memory Overflow
Paper Empty
[Size] In Tray1
Paper Empty
[Size] In Tray2
Paper Empty
[Size] In Mp
Paper Empty
[Size] In Manual
Page Too Complex
Ready
[Color]Low Toner
7.28
S P
OLVING ROBLEMS
Status
A paper jam has occurred
inside the printer.
After installing a transfer
belt, the lock levers has
not been locked.
The printer is waiting for
the user's action before
printing from the manual
feeder.
The paper size specified in
the printer properties
does not match the paper
you are loading.
A problem has occurred in
the main motor of the
printer.
The printer does not have
enough memory to print
the current job.
An error has occurred in
the firmware program of
the printer.
The paper tray has run
out of paper.
Too much complicated
data was sent to the
printer.
The corresponding toner
cartridge in your printer is
low on toner.
Do this...
Open the right cover and remove the
jammed paper from the printer,
referring to page 7.9.
Push the lock levers on each side
away from you, referring to
page 6.27.
Load a sheet of print material and
press the On Line/Continue
button. You need to press the button
for each page to be printed.
Load the correct paper in the tray
Unplug the power cord and plug it in
again. If the problem persists, call for
service.
The job automatically clears and the
printer returns to Standby Mode.
• Expand the memory in your printer.
See "Installing Additional Printer
Memory" on page D.2.
Load paper in the paper tray. See
page 3.4.
Simplify the page layout and remove
unnecessary graphics from your
document.
To expand the memory in your
printer, see "Installing Additional
Printer Memory" on page D.2.
Redistribute the toner in the
corresponding toner cartridge,
referring to page 6.5.