Samsung CLP-510 Series Setup Manual page 222

3
The LLPR Properties window opens.
The following six tabs are at the top of the window:
• General - allows you to change the paper size, the paper
type, the paper source, the orientation of documents;
enables the duplex feature, adds start and end banners,
and changes the number of pages per sheet.
C
: When you print color documents on transparencies,
AUTION
color print quality problems may be occured.
• Margins - allows you to specify page margins. The graphic
on the right shows the current settings. These margins do
not apply when printing regular PostScript data.
• Image - allows you to set image options that are used when
printing image files, i.e., when a non-PostScript document is
passed to LLPR on the command line. Color settings will also
take effect for postscript documents.
• Text - allows you to select the density of the text and turn
the syntax coloring on or off.
• HP-GL/2 - allows you to set default options to print
documents in the HP-GL/2 format, which is used by some
plotters.
• Advanced - allows you to override the default settings for
the printer.
If you click the Save button at the bottom of the window, the
options are kept between LLPR sessions.
Use the Help button to view details about the options in the
window.
4
To apply the options, click OK in the LLPR Properties window.
You are returned to the Linux LPR window. To start printing,
click OK.
U Y P
SING OUR RINTER IN
B
B.11
L
INUX