Supported Sizes Of Paper; Guidelines For Using Paper - Samsung CLP-600 Series User Manual

Supported Sizes of Paper

Tray1/
Dimensions *
Tray2
Letter 8.5 x 11in. (216 75 to 90g/m
x 279mm) (20 to 24lb) for
single-sided printing
A4 8.27 x 11.7in.
(210 x 297mm)
Multi-purpose
Dimensions
Tray
Minimum Size 3.5 x 5.5in. (90 x
(custom) 140mm)
Maximum Size 8.5 x 14in. (216
(custom) x 356mm)
***
Labels Same minimum
and maximum
paper sizes as
listed above.
Envelopes
* The printer supports a wide range of media sizes.
** Capacity may vary depending on media weight and thickness,
and environment.
*** Smoothness: 100 to 250 (Sheffield)
N
: You may experience jams when using print materials
OTE
with a length of less than 140mm (5.5in.). For optimum
performance, ensure that you are storing and handling the
paper correctly. Please refer to "Printer and Paper Storage
Environment" on page 10.3.
Weight Capacity
2
bond • 250 sheets of
2
75g/m bond
paper for Tray1
• 500 sheets of
2
75g/m bond
paper for Tray2
*
Weight Capacity
2
75 to 163g/m 100 sheets of
2
bond (20 to 75g/m bond
43lb) paper
Thickness: 0.10 10 typical
x 0.14 mm
(0.0039 x
0.0055in.)
2
75 to 105g/m up to 10
(20to 27lb)

Guidelines for Using Paper

For the best result, use conventional 75g/m
**
Ensure that the paper is of good quality, and free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, voids, and curled
or bent edges.
If you are unsure of what type of paper you are loading, such
as bond or recycled paper, check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the printer.
Symptom
**
Poor print quality
or toner
adhesion,
problems with
feeding
Dropout,
jamming, curl
Increased gray
background
shading/printer
wear
Excessive curl
problems with
feeding
Jamming,
damage to
printer
Problems with
feeding
N :
OTES
• Do not use letterhead paper printed with low-temperature
inks, such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the
paper. Ensure that any colored paper or preprinted forms
use inks that are compatible with this fusing temperature
(180°C or 356°F for 0.1 second).
10.2
Specifications
2 (20lb) paper.
Problem with
Solution
Paper
Too moist, too Try another kind of
rough, too paper, between 100 ~
smooth, or 250 Sheffield, 4 ~ 5%
embossed; faulty moisture content.
paper lot
Stored improperly Store paper flat in its
moisture-proof
wrapping.
Too heavy Use lighter paper,
open the rear output
tray.
Too moist, wrong Use long-grain paper.
grain direction, or
short-grain
construction
Cutouts or Do not use paper with
perforations cutouts or
perforations.
Ragged edges Use good quality
paper.