Samsung CLP-600 Series User Manual page 26

Item
This item performs a simple reset and restores
the factory default for the wireless configuration.
WLAN Default
N : This menu only appears when an optional
OTE
wired/wireless network interface card has been
installed.
Options: On, Off
You can select whether or not to use the Netware
protocol.
Netware
If you select On, you can access the Config
Netware menu item.
In the Config Netware menu, you can specify
the frame type parameter used on your network.
Options: Yes, No
You can set this item only when you set
Netware to On. This item lets you select
Config Netware
whether or not you set the frame type parameter.
Select Yes to select the frame type.
If you select Yes, the IPX Frame Type option
appears on the display.
Values: Auto, EN_8022, EN_8023, EN_II,
EN_SNAP
You can select this item only when you set
Config Netware to Yes. This item lets you
select the IPX Frame Type.
• Auto: You can set a frame type automatically.
IPX Frame Type
• EN_8022: Select this value to use the IEEE
802.2 frame type.
• EN_8023: Select this value to use the IEEE
802.3 frame type.
• EN_II: Select this value to use the ETHERNET
II frame type.
• EN_SNAP: Select this value to use the SNAP
frame type.
Reset Network This item reboots the network interface card.
This item performs a simple reset and restores
Default Set the factory default settings for the network
configuration.
This item prints a page showing the network
Print Net CFG
parameters you have set.
Explanation
Using the Control Panel
3.6