Using Control Panel Menus (Clp-600N Only); Accessing Control Panel Menus; Overview Of Control Panel Menus; Information Menu - Samsung CLP-600 Series User Manual

Using Control Panel Menus
600N Only)
A number of menus are available to make it easy for you to
change printer settings. The diagram on page 3.3 shows the
menus and all of the items available in each menu. The items
in each menu and the options you can select are described in
more detail in the tables beginning on page 3.3.

Accessing Control Panel Menus

You can configure your printer from the printer's control panel.
1
In ready mode, press the Menu button (
the menu you want on the bottom line of the display.
2
Press the Enter button (
3
Press the scroll button (
you want displays on the bottom line.
4
Press the Enter button (
5
If the menu item has sub menus, repeat steps 3 and 4.
6
Press the scroll button (
you want displays on the bottom line.
7
Press the Enter button (
selection.
An asterisk (*) appears next to the selection on the
display, indicating that it is now the default.
8
To exit the menu, press the Upper Level button (
repeatedly, or the Cancel button(
After 60 seconds of inactivity (no key being pressed), the
printer automatically returns to ready mode.
N
: Print settings made from the printer driver on a
OTE
connected computer override the settings on the control panel.
(CLP-
) until you see
) to access the menu.
or ) until the menu item
) to confirm the selected item.
or ) until the menu item
) to save your input or
)
).
Using the Control Panel

Overview of Control Panel Menus

The control panel menus are used to configure the printer. The
control panel provides access to the following menus:
Information
(See page 3.3.)
Configuration
Menu Map
Demo Page
Printer
(See page 3.4.)
Default Set
Current Job
Setup
(See page 3.4.)
LCD Language
Power Save
Auto Continue
Network
(See page 3.5.)
Config Network
Config TCP
IP Get Method
IP Address
Subnet Mask
Gateway
Config WLAN*
WLAN Default*
* This menu only appears when an optional wired/wireless network interface
card has been installed.

Information Menu

This menu contains information pages that you can print to give
details about the printer and its configuration.
Item
Configuration
3.3
Color
(See page 3.4.)
Custom Color
Auto Color Reg
Jam Recovery
Altitude Adj.
Maintenance
Netware
Config Netware
IPX Frame Type
Reset Network
Default Set
Print Net CFG
Explanation
The configuration page shows the printer's
current configuration. See page 6.1.