Changing The Display Language (Clp-600N Only); Installing The Printer Software; System Requirements; Software Section - Samsung CLP-600 Series User Manual

Samsung color laser printer user's guide
Hide thumbs Also See for CLP-600 Series:
Table of Contents

Advertisement

Changing the Display Language
(CLP-600N Only)
To change the language that is displayed on the control panel,
take the following steps:
1
In ready mode, press the Menu button (
control panel until you see "Setup" on the bottom line of
the display.
2
Press the Enter button (
3
Press the Enter button (
displays on the bottom line of the display.
4
Press the scroll button (
want to use displays.
5
Press the Enter button (
6
Press the On Line/Continue button (
ready mode.

Installing the Printer Software

You must install software using the supplied Printer
software CD after you have set up your printer and
connected it to your computer. For details, see the
Software
section.
The Printer software CD provides you with the following
software:
Programs for Windows
You can install the following printer software using the Printer
software CD.
• Printer driver for Windows. Use this driver to take full
advantage of your printer's features. See the Software
section for details about installing the Samsung printer
driver.
• SmartPanel. Appears when printing errors occur. See the
Software section for details about installing the
SmartPanel program.
Macintosh Printer Driver
You can print from a Macintosh with your printer. Go to the
Software section for information about installing the print
software and printing from a Macintosh.
Linux Driver
You can print from a Linux-based computer with your printer.
Go to the Software section for information about installing
the Linux driver and printing from a Linux environment.
) on the
) to access the menu.
) when "LCD Language"
or
) until the language you
) to save the selection.
) to return to
Setting Up Your Printer

System Requirements

Before you begin, ensure that your system meets the minimum
requirements. Your printer supports the following operating
system.
• Windows 98SE/Me/NT 4.0/2000/XP/2003 - The following
table shows Windows requirements.
Item
Operating system
RAM
Free Disk Space
Internet Explorer
N
:
OTES
• For Windows NT 4.0/2000/XP/2003, the system
administrator should install the software.
• Windows NT 4.0 is only supported on the CLP-600N.
• Macintosh 10.3 ~ 10.4 - For details, see the Software
section.
• Various Linux OS - For details, see the Software section.
2.8
Requirements
Windows 98SE/Me/NT 4.0/2000/XP/
2003
98SE/Me
32 MB
NT 4.0/2000
64 MB
XP
128 MB
2003
256 MB
98SE/Me/NT 4.0/
300 MB
2000/XP/2003
5.0 or higher

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp-600n

Table of Contents