Setting Up The Bios - Sun Oracle Netra X6270 M3 Installation Manual

Related Information
"Downloading Installation Media Kits" on page 7
■

Setting Up the BIOS

Before you install the operating system, you should ensure that BIOS settings are
configured to support the type of installation you plan to perform. The following
topics provide specific instructions on how to configure the BIOS to support the
installation:
"Load BIOS Optimal Default Settings" on page 13
■
"Set the BIOS Mode" on page 14
■
▼ Load BIOS Optimal Default Settings
Caution – This procedure resets the BIOS settings to the default values, and
overwrites any previously customized settings. To retain customized settings, review
each menu and make note of the customized values before loading the default
values.
The BIOS Setup Utility contains an option to load the optimal BIOS settings for the
server. Perform this procedure on a newly installed server to ensure that the BIOS is
set to the optimal default values.
The server is equipped with a properly installed storage drive.
■
A console connection is established to the server. For details, see
■
Installation Method" on page 8
1. Power on the server.
POST messages appear on the console.
2. Watch the messages, and, when prompted, press F2 to access the BIOS Setup
Utility.
The BIOS Setup Utility main screen is displayed.
3. To ensure that the factory defaults are set, press F9.
4. To save the changes, and exit the BIOS Setup Utility, press F10.
"Setting Up the
Preparing to Install the OS 13