Ac Input Wiring Motor Output Wiring; Plus Gnd 3W Plus Gnd; Wiring: 200–250 V Three-Phase Fan Controllers - BIG ASS FANS Pivot Installation Manual

Wiring: 200-250 V, three-phase fan controllers
WARNING: Wait three minutes after disconnecting before servicing!
WARNING: Improper installation can cause electric shock or damage to the motor and controller. A
qualified electrician should perform the installation.
The diagrams below show wiring options for a 200-250 V, 3 Φ fan controller. See "Power Requirements for Fan
Controllers" for detailed power requirements.
Wiring for 200-250 V, 3 Φ, 50/60 Hz fan controllers
A disconnect is included with the fan controller for
200-250 V, 3 Φ. An EMI filter is not included with this
fan controller.
Note: This fan controller does not contain fusing!
Power must be supplied to this controller via
a dedicated circuit breaker or properly fused
disconnect!
Optional 1 Φ wiring for 200-250 V, 3 Φ, 50/60 Hz
controllers
The L3 terminal is not used when wiring the fan
controller for 200-250 V, 1 Φ. A disconnect is included
with the fan controller. An EMI filter is not included with
this fan controller.
Note: This fan controller does not contain fusing!
Power must be supplied to this controller via
a dedicated circuit breaker or properly fused
disconnect!
30
WWW.BIGASSSOLUTIONS.COM © 2015 DELTA T CORP.
1 2 5 6 1 2 5 6 25 4 11 25 4 11
PE
U V W
/T1 /T2 /T3
GRN/YEL
BLK
RED BLU
AC Input Wiring
Motor Output Wiring
3W plus GND
1 2 5 6 25 4 11
1 2 5 6 25 4 11
PE
U V W
/T1 /T2 /T3
BLK GRN/YEL
RED
AC Input Wiring Motor Output Wiring
2W plus GND
ALL RIGHTS RESERVED.
13A13B13C 14 30 16 17 13A13B13C 14 30 16 17
L1
L2
L1 L2 L3
L3
RED GRN/
YEL
BLK BLU
3W plus GND
13A13B13C 14 30 16 17
13A13B13C 14 30 16 17
L1
L2
L1 L2 L3
L3
RED GRN/
YEL
BLK BLU
3W plus GND