Tire pressure & temperature monitoring system 2.0 (12 pages)
Summary of Contents for Lippert SolidStep Gen 2
Page 1
SolidStep Gen 2 ™ Installation and Owner’s Manual (For Aftermarket Applications) SolidStep ™ Gen 2 Installation and Owner’s Manual (For Aftermarket Applications) Table of Contents Introduction ..........Resources Required .
Page 2
NOTE: The door and frame have been removed for clarity. material for securing the SolidStep GEN 2. SolidStep Installation 1. Place the SolidStep GEN 2 assembly inside the door frame and verify with a tape measure that the SolidStep FAILURE TO FOLLOW THE INSTRUCTIONS PROVIDED GEN 2 is centered in the door frame.
Page 3
SolidStep Gen 2 ™ Installation and Owner’s Manual (For Aftermarket Applications) DO NOT ATTEMPT TO LOCK THE STEP IN PLACE, AS THE LATCHING MECHANISM MAY NEED TO BE ADJUSTED TO THE PROPER LEFT-RIGHT ORIENTATION AND TIGHTENED IN POSITION BEFORE USING THE TRANSPORT LOCK. ATTEMPTING TO ENGAGE THE TRANSPORT LOCK WITHOUT PROPER Fig.3 ADJUSTMENT MAY CAUSE DAMAGE TO THE DOOR...
Page 4
Revised editions will be available for free download at www.lippertcomponents.com. Manual Fig.6 information is considered factual until made obsolete by a revised version. Please recycle all obsolete materials and contact Lippert Components with concerns or questions. lippertcomponents.com 574-537-8900 Rev: 03.17 - SolidStep Gen 2 ™...