AMX DCE-1 Instruction Manual page 18

API Command List Instructions (cont.)
IDX Function Description
7 Get all boards firmware
version
8 Upgrade module
9 Reset the device
10 Reboot the device
11 Set command ending
character
12 Set Output HDCP
support to follow/off
13 Set RELAY to LATCH
14 Get RELAY mode
Instruction Manual - Display Control and EDID Manager
Command
Command:
~VER!
Return:
~VER!( # )
Command:
~UPG!
Return:
~UPG!
Command:
~SYSR!
Return:
~SYSR!
Command:
~APP!
Return:
~APP!
Command:
CUE#T
Return:
CUE#T
Parameter:
UE#: # = {1~4}
1: NULL
2: 0X0D
3: 0X0A
4: 0X0D 0X0A
Command:
CDCP#T
Return:
CDCP#T
Description:
DCP#: # ={0~1}
0: follow, set HDCP support of Output
follows that of Input
1: off, set Output HDCP support as
off.
Command:
CRM#T
Return:
CRM#T
Description:
RM#: # = {1, 2}
1: Latch
2: Momentary
Command:
SRMT
Return:
SRMT( value )
Description:
RM# : # = {1, 2}
1: Latch
2: Momentary
API Command List Instructions
Example
Command:
~VER!
Return:
~VER!(mainmcu ver Vx.x slavemcu
ver Vx.x)
Description:
Get all boards firmware version.
Command:
~UPG!
Return:
~UPG!
Command:
~SYSR!
Return:
~SYSR!
Command:
~APP!
Return:
~APP!
Command:
CUE4T
Return:
CUE4T
Description:
Set command ending character as
"0X0D 0X0A".
Command:
CDCP1T
Return:
CDCP1T
Description:
Set Output HDCP support as off.
Command:
CRM1T
Return:
CRM1T
Description:
Set relay to latch mode.
Command:
SRMT
Return:
SRMT(1)
Description:
Get relay mode, the result is Latch.
Note
Default setting
is off.
18