Edid Management - AMX DCE-1 Instruction Manual

EDID Management

EDID (Extended Display Identification Data) is a data structure provided by a digital display to describe its capabilities to a
video source.
The DCE-1 features multiple EDID presets which can be performed using the EDID rotary switch on the rear panel. By default, the
EDID switch is set in position 0. Should any compatibility issues occur, use the following table for the EDID setting:
Position
0 (default)
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Note:
1. If EDID copy fails, 1920x1080@60Hz with stereo audio will be set as the Input EDID.
2. For the EDID settings to take effect, the DCE-1 must be re-booted.
Instruction Manual - Display Control and EDID Manager
Description
Copy EDID from HDMI OUT
Set 3840x2160@60Hz 2CH as input EDID
Set 3840x2160@30Hz 2CH as input EDID
Set 1920x1080@60Hz 2CH as input EDID
Set 1280x720@60Hz 2CH as input EDID
Set 1920x1200@60Hz 2CH as input EDID
Set 1680x1050@60Hz 2CH as input EDID
Set 1600x1200@60Hz 2CH as input EDID
Set 1600x900@60Hz 2CH as input EDID
Set 1440x900@60Hz 2CH as input EDID
Set 1400x1050@60Hz 2CH as input EDID
Set 1360x768@60Hz 2CH as input EDID
Set 1280x1024@60Hz 2CHas input EDID
Set 1280x960@60Hz 2CH as input EDID
Set1280x768@60Hz 2CH as input EDID
Set 1024x768@60Hz 2CH as input EDID
EDID Management
13