Rosewill RNX-EASYN4 User Manual page 71

Wireless Router RNX-EasyN4
Enable Port Forwarding: Enable or disable Port Forwarding.
Description: The description of this setting.
Local IP / Local Port: This is the LAN Client/Host IP address and Port number that
Type: Select the port number protocol type (TCP, UDP or both). If you are unsure,
then leave it to the default "both" setting. Public Port enters the service
(service/Internet application) port number from the Internet that will be re-
directed to the above Private IP address host in your LAN Network.
Public Port: Port number will be changed to Local Port when the packet enters your
LAN Network.
Add Port Forwarding
Fill in the "Description" , "Local IP", "Local Port", "Type" and "Public Port"
of the setting to be added and then click <Add> button. Then this Virtual
Server setting will be added into the "Current Port Forwarding Table" below.
If you find any typo before adding it and want to retype again, just click <Clear>
and the fields will be cleared.
Remove Port Forwarding
If you want to remove Port Forwarding settings from the "Current Port
Forwarding Table", select the Port Forwarding settings you want to remove in
the table and then click "Delete Selected". If you want to remove all Port
Forwarding settings from the table, just click the <Delete All> button. Click
<Reset> will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
the Public Port number packet will be sent to.
User Manual