Table of Contents
Advertisement
Fitting the towel rail (if applicable)
•
On the towel rail there are two hole, top (A) and bottom (B), these holes have corresponding holes
on the fascia at each end.
•
The 2x longer screws are designed for the top hole (A) where as the remaining screw just goes
through the bottom hole (B). Both screws are M6 screws. Using the Allen key provided, tighten the
screws making sure that the towel rail is flush to the fascia, but not over tightened.
BEFORE INSTALLATION
A
B
Hide quick links:
Advertisement
Table of Contents
