Table of Contents
Advertisement
To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P
position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the
driving position adjustment is
completed.
NOTE
If the driving position movement is not
•
changed, only the beep sounds.
A seat position can be called up even
•
with the engine not running.
The driving position adjustment is
•
cancelled in the following cases:
Any of the seat adjustment switches is
•
operated.
The SET button is pressed.
•
Programming button 1 or 2 is pressed.
•
The key
button or
•
operated.
The vehicle starts moving.
•
The active driving display is adjusted.
•
(Using a programmed key)
1. Unlock the doors by pressing a request
switch or the key
CX-8_8GF4-EO-18D_Edition1
button is
button.
Essential Safety Equipment
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
3. Make sure the parking brake is on.
4. Make sure the selector lever is in the P
position.
5. Start the engine.
6. The active driving display adjustment
begins.
NOTE
If there is no driving position movement,
•
a beep is not heard.
The driving position adjustment is
•
cancelled in the following cases:
Any of the seat adjustment switches is
•
operated.
The SET button is pressed.
•
Programming button 1 or 2 is pressed.
•
The key
button or
•
operated.
The vehicle starts moving.
•
The active driving display is adjusted.
•
Seats
button is
2-13
2018-3-6 19:38:07
Advertisement
Table of Contents
