Table of Contents
Advertisement
NOTE
On vehicles equipped with the centre display, the i-stop operation status is displayed in the
fuel monitor control status display.
Refer to Control Status Display on page 4-77.
i-stop warning light (amber)
When the light is turned on
The light turns on when the ignition is switched ON and turns off when the engine is
•
started.
The light turns on when the i-stop OFF switch is pressed and the system is turned off.
•
NOTE
A problem in the system may be indicated under the following conditions. Have your vehicle
inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON.
•
The light continues to remain on even though the i-stop OFF switch has been pressed
•
while the engine is running.
When the light is flashing
The light continues to flash if the system has a malfunction. Have your vehicle inspected at
an expert repairer, we recommend an Authorised Mazda Repairer.
i-stop indicator light (green)
When the light is turned on
The light turns on while engine idling is stopped and turns off when the engine is
•
restarted.
The light turns on when the engine idling stop conditions are met while the vehicle is
•
driven.
When the light is flashing
The light flashes if the vehicle is stopped but the brake pedal is not depressed with
•
sufficient force. Depress the brake pedal a little more strongly because the pedal force
may be insufficient.
CX-8_8GF4-EO-18D_Edition1
When Driving
Start/Stop Engine
4-15
2018-3-6 19:38:07
Advertisement
Table of Contents
