Resuming Control; Turning Off The System - Mazda CX-8 Manual

Under the following conditions, the
MRCC with Stop & Go function cancel
indication is displayed in the
multi-information display and a single
beep sound is heard.
The DSC has operated.
•
The Smart Brake Support (SBS) has
•
operated.
The Advanced Smart City Brake
•
Support (Advanced SCBS) has operated.
When travelling on a downslope for a
•
long period of time.
There is a problem with the system.
•
The engine has stalled.
•
The parking brake is automatically
•
applied during stop hold control.
The radar sensor (front) cannot detect
•
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).

Resuming control

If the MRCC with Stop & Go function
system is cancelled, you can resume
control at the previously set speed by
pressing the RES switch and after all of
the operation conditions have been met.
NOTE
If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.

Turning off the system

Press the OFF/CANCEL switch 2 times
while the MRCC with Stop & Go function
system is operating to switch off the
system.
CX-8_8GF4-EO-18D_Edition1
When Driving
i-ACTIVSENSE
4-121
2018-3-6 19:38:07