Table of Contents
Advertisement
When Driving
i-ACTIVSENSE
▼ Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies the
brakes suddenly while you are travelling in headway control, the warning sound activates
and the brake warning is indicated in the display. Always verify the safety of the
surrounding area and depress the brake pedal while keeping a safer distance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.
NOTE
In the following cases, the warnings and brakes may not operate even if your vehicle starts
closing in on the vehicle ahead.
You are driving your vehicle at the same speed as the vehicle ahead.
•
Directly after the MRCC with Stop & Go function system has been set.
•
Directly after the accelerator pedal is released.
•
Another vehicle cuts into the driving lane.
•
▼ Setting the System
The MRCC with Stop & Go function system operates when all of the following conditions
are met.
Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)
•
The MRCC with Stop & Go function is turned on.
•
The brake pedal is not depressed.
•
The parking brake is released (Electric Parking Brake (EPB) indicator light is turned off).
•
There is no problem with the DSC.
•
All the doors are closed.
•
The driver's seat belt is fastened.
•
The selector lever is in the drive (D) position or manual (M) position (manual mode).
•
NOTE
In the following cases, the MRCC with Stop & Go function system is cancelled when the
•
vehicle is travelling at 30 km/h (19 mph) or less and "Mazda Radar Cruise Control
disabled under 30 km/h" is displayed in the multi-information display.
The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
•
with the Forward Sensing Camera (FSC) or windscreen is dirty).
There is a problem with the stop hold control function.
•
There is a problem with the Electric Parking Brake (EPB).
•
It may not be possible to set the MRCC with Stop & Go function system directly after
•
starting the engine, while the DSC operation is being checked.
4-116
CX-8_8GF4-EO-18D_Edition1
2018-3-6 19:38:07
Advertisement
Table of Contents
