Table of Contents
Advertisement
Maintenance and Care
Owner Maintenance
2. Disconnect the electrical connector
from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
CAUTION
When replacing the bulb always
disconnect the connector first.
Otherwise, electric and electronic
devices could be shorted.
3. Insert the flathead screwdriver into the
gap between the lens and the lens unit,
and then slide the screwdriver to
detach the lens.
6-40
CX-8_8GF4-EO-18D_Edition1
4. Disconnect the bulb by pulling it out.
5. Install the new bulb in the reverse
order of the removal procedure.
2018-3-6 19:38:07
Advertisement
Table of Contents
