Key Battery Replacement; Replacing The Key Battery - Mazda CX-8 Manual

Hide thumbs Also See for CX-8:
Table of Contents

Advertisement

Maintenance and Care
Owner Maintenance

Key Battery Replacement

If the buttons on the transmitter are
inoperable and the operation indicator
light does not flash, the battery may be
dead.
Replace with a new battery before the
transmitter becomes unusable.
CAUTION
Make sure the battery is installed
correctly. Battery leakage could occur if it
is not installed correctly.
When replacing the battery, be careful
not to touch any of the internal circuitry
and electrical terminals, bend the
electrical terminals, or get dirt in the
transmitter as the transmitter could be
damaged.
There is the danger of explosion if the
battery is not correctly replaced.
Dispose of used batteries according to
the following instructions.
Insulate the plus and minus terminals
of the battery using cellophane or
equivalent tape.
Never disassemble.
Never throw the battery into fire or
water.
Never deform or crush.
Replace only with the same type battery
(CR2025 or equivalent).
6-28
CX-8_8GF4-EO-18D_Edition1
The following conditions indicate that the
battery power is low:
The messages are displayed in the
instrument cluster for about 30 seconds
after the engine is switched OFF.
The system does not operate and the
operation indicator light on the
transmitter does not flash when the
buttons are pressed.
The system's operational range is
reduced.
Replacing the battery at an Authorised
Mazda Repairer is recommended to
prevent damage to the key. If replacing the
battery by yourself, follow the instruction.

Replacing the key battery

1. Press the knob and pull out the
auxiliary key.
Knob
2018-3-6 19:38:07

Advertisement

Table of Contents
loading

Table of Contents