The steering wheel is almost in the straight-ahead position (idling may not stop even with
•
the steering wheel in the straight-ahead position if force is applied to the steering wheel.
Release the force applied to the steering wheel to stop engine idling).
The vehicle is stopped by depressing the brake pedal.
•
Emergency braking is not applied.
•
When the vehicle is stopped by the Mazda Radar Cruise Control with Stop & Go function
•
(MRCC with Stop & Go function) stop hold control (vehicles with Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function).
When the system is not operable
Engine idling does not stop in the following conditions:
The vehicle is stopped but the engine is kept idling.
•
The air conditioner is operating with the airflow mode dial in the
•
The temperature setting dial for the air-conditioning is set to the maximum heating or
•
maximum cooling (A/C ON) position.
There is a large difference between the cabin temperature and the set temperature of the
•
air conditioner.
The ambient temperature is extremely high or low.
•
The atmospheric pressure is low (when driving at high altitudes).
•
The vehicle is stopped on a steep incline.
•
The steering wheel is not in the straight-ahead position while the vehicle is stopped.
•
The particulate matter (PM) is being removed by the diesel particulate filter (DPF).
•
•
NOTE
Under the following conditions, a period of time is required to stop engine idling
The battery power is depleted for some reasons such as the vehicle has not been driven
•
for a long period.
The ambient temperature is high or low.
•
After the battery terminals are disconnected for some reasons such as for battery
•
replacement.
After PM removal is performed by the diesel particulate filter (DPF).
•
Engine-stop period is short or time until next engine idle stop is long
The ambient temperature is high or low.
•
The battery power is depleted.
•
Power consumption by the vehicle's electrical parts is high.
•
Engine restarts automatically while engine idling is stopped
Under the following conditions, the engine restarts automatically.
The i-stop OFF switch is pressed until the beep sounds.
•
The air conditioner is operated with the airflow mode dial in the
•
CX-8_8GF4-EO-18D_Edition1
When Driving
Start/Stop Engine
position.
position.
4-13
2018-3-6 19:38:07