INSTALLATION INSTRUCTIONS VOLT Path & Area Light Stem ® VSM-2407 & VSM-1203 Important: Please Read Before Installation This fixture is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. (1) Stem Parts Required (sold separatly) A. (1) Hat C. Stake B. (1) Bulb Product Dimensions Max Spread Hat Pictured Here 9” 2.5” 22.5” customersupport@voltlighting.com • 813.978.3700 - 3 -...
Page 4
INSTALLATION INSTRUCTIONS VOLT Path & Area Light Stem ® VSM-2407 & VSM-1203 Remove Stem Top Loosen the stem top and remove it from the stem. Stem Top Stem Install Bulb Insert the bulb with correct wattage and type marked on the fixture label Bulb and push firmly into place.
Page 5
Install Stake Determine the desired location for Board mounting the fixture. Hammer the stake into the ground until the flange of the stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering. Stake NOTE: If the ground is hard and the Ground...
Page 6
INSTALLATION INSTRUCTIONS VOLT Path & Area Light Stem ® VSM-2407 & VSM-1203 Wire Connection Pigtail Wire Connectors Main Supply Cable Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.
Need help?
Do you have a question about the VSM-2407 and is the answer not in the manual?
Questions and answers