Before Printing; System Start-Up; Starting Up The Imaging Controller - FujiFilm FRONTIER 350 Instruction Manual

distributed by www.minilablaser.com
3

Before Printing

3.1
■ Start-up Flow
Start up the whole system using the following steps.
IMPORTANT
Make sure to start up the system by using the following procedures.

3.1.1 Starting Up the Imaging Controller

1
Check if the peripherals are turned on, then start
up the Imaging Controller.

System Start-up

Imaging Controller Start-up
Printer (LP) Start-up
Scanner (SP) Start-up
Pre-operational Checks in FMPC
Pre-operational Checks in FRONTIER
(See 3.3 for FRONTIER 350/370. See 3.4 for FRONTIER 355/375/570.)
FMPC Start-up
2
The "Order Reception" screen appears.
FD019
(See 3.1.1)
(See 3.1.2)
(See 3.1.3)
(See 3.1.4)
(See 3.2)
21