Safety; Basic Operating Precautions; Caution Regarding Electric Shock - FujiFilm FRONTIER 350 Instruction Manual

distributed by www.minilablaser.com
1.1

1.1.1 Basic Operating Precautions

• When accessing the machine interior for inspection or servicing, shut down the system by proceeding with
the post-operational checks, place the built-in circuit breaker in the OFF position, and turn OFF the main
power circuit breaker.
Inspecting or servicing the inside of the machine with the main power circuit breaker left ON may expose
personnel to hazardous conditions and damage the machine.
• If the machine emits smoke, generates an abnormal sound or its external surface becomes unduly hot,
immediately stop using it, set the power switch to STANDBY, place the built-in circuit breaker in the OFF
position, turn OFF the main power circuit breaker, and contact your local dealer.
z Do not modify the machine without permission from the manufacturer because safety assurance features
and other essential functions may be impaired. If the machine needs to be modified, contact your local
dealer.
x Never remove covers or other parts that are screwed down to avoid the risk of electric shock or injury to
personnel. If any parts need to be unscrewed, contact your local dealer.
• Use only Fujifilm-recommended replacement parts.
IMPORTANT
If parts other than those recommended by Fujifilm are used, the warranty will be voided.

1.1.2 Caution regarding Electric Shock

Utmost care should be taken as the machine is connected to 200/210/220/230/240V AC power sources.
Avoid the possibility of electric shock by noting the following:
• Never operate the machine if it is wet.
• Never operate the machine if the surrounding floor is wet.
• Ensure the electrical earth connection is permanently made.
• Ensure that all cables are undamaged and correctly connected.
8

Safety