Evaporation Correction Rate Setting (465); Low Volume Setting (466) - FujiFilm FRONTIER 350 Instruction Manual

distributed by www.minilablaser.com
8.2.27 Evaporation Correction Rate
Setting (465)
[Selection]
"4 Setup and Maintenance" - "6 Processor
Adjustment/Maintenance" - "5 Evaporation
Correction Rate Setting"
[Procedure]
Set the evaporation correction rate.
1
Select "YES" to "Evaporation Correction", and
"Standard" to "Humidity".
2
Click [OK].
• Operation returns to the "4 Setup and
Maintenance" screen.
106

8.2.28 Low Volume Setting (466)

[Selection]
"4 Setup and Maintenance" - "6 Processor
Adjustment/Maintenance" - "6 Low volume Setting"
[Procedure]
Set the low volume processing data.
1
Select "YES" to "Low volume".
2
Enter value in the "Min. processing amount" box.
Range : 0.0 to 15.0
3
Enter value in the "Min. processing amount (last
8 days)" box.
Range : 0.0 to 99.9
4
To clear the data, press the [Clear] button.
5
Click [OK].
• Operation returns to the "4 Setup and
Maintenance" screen.
FMPC