Table of Contents
Advertisement
4. Select Trip 1 (10) or Trip 2 (11) by pushing switch (4) or
(5), and then push set switch (6) to make the change.
f
NOTE: Time for "Trip 1" and "Trip 2" can be set individually.
5. Each time switch (4) or (5) is pushed, the set time will be
changed as follows.
By using switch (4) to change
Current value
(example)
35.2
184.7
By using switch (5)
Current value
(example)
35.2
184.7
f
NOTE: The set time is 9999.9h when the machine is shipped
from the factory.
6. Each time switch (4) or (5) is pushed, the set time will be
changed as follows.
50>100>150>200>250>300>400>500>750>1000>1250
>1500>2000>2500>3000
7. When the display item is set for "Trip 1" or "Trip 2" while
displaying the desired set time, the time displayed on
the basic screen will be reset to the set time.
IMPORTANT: When the setting is changed, the operation
time is counted from the point at which it is reset.
Please note that displayed time does not indicate the
accumulated operation time from the point at which it
is first set.
f
NOTE: When "Trip" is set, remaining time to reach the preset
operation hour will be displayed on Display (12).
Therefore, when the Trip mark starts blinking, the Trip meter
display is 0 hr.
After that, Trip meter displays negative value until it is reset.
OPERATOR'S STATION
Changed set time
3000
150
Changed set time
50
200
1-29
10
11
4
5
6
MADB-01-044EN
10
4
5
6
MADB-01-049EN
12
MADB-01-047
Advertisement
Table of Contents
