Hitachi Zaxis 33U-5A Operator's Manual page 78

 Overload Alarm Selector (Optional) (12)
This selector is displayed when the machine is equipped
with the overload alarm device. Push selector (12) to turn
the overload alarm ON/OFF.
: Overload Alarm "OFF"
: Overload Alarm "ON"
 Auto-Idle Switch (14)
When the auto-idle switch is turned ON, the indicator
displays ON and the function is enabled.
 Travel Mode Indicator (16)
The travel mode selected by the travel mode switch located
on the end of the blade lever is displayed.
 Work Light Indicator (17)
The indicator is displayed while the work light switch on the
switch panel is turned ON and the work lights on the front
side of the boom and the canopy are lit.
OPERATOR'S STATION
1-12
17
16
14
5
7
11
12
MADC-01-010