Travel Mode Switch - Hitachi Zaxis 33U-5A Operator's Manual

Travel Mode Switch

d
WARNING: Tipping-over accidents can cause serious
personal injury. Do not change travel mode switch
(1) while traveling; especially, changing to fast mode
when descending slopes will create a very dangerous
situation. Always stop the machine before changing
the travel speed mode.
Press on travel mode switch (1) to select the fast travel
mode.
Press on travel mode switch (1) to select the slow travel
mode.
f
NOTE: At low temperature, when the machine is traveling
with travel mode switch (1) in the fast travel mode position,
the slow travel mode may not automatically be selected even
if the traveling loads increase. This symptom is not abnormal.
Drive the machine after conducting sufficient warm-up
operation.
The slow travel mode will automatically be selected if the
traveling loads increase.
is displayed on the monitor. Return fast travel mode if the
traveling loads decrease.
If the key switch is turned OFF while the machine is running
at fast speed, the travel mode shifts to slow speed when
restarting the engine.
DRIVING THE MACHINE
4-3
Switch Panel Type
1
Blade Lever Type (Option)
1
MADC-01-003
MADB-01-008
MADB-01-011