Table of Contents
Advertisement
Floor Tilt Up Procedure
1. After operating the machine, wait for the machine to
sufficiently cool.
2. Park the machine on a level surface.
3. Lower the blade.
4. After rolling the arm and the bucket in, lower the bucket
on a wooden block down to the ground.
5. Face the front attachment straightforward toward the
machine without swinging the front attachment at this
time.
6. Stop the engine. Remove the key from the key switch.
7. Close the cab (optional) door.
IMPORTANT: Remove bolt (1) and cover (2). If the floor is
tilted up with cover (2), damage to cover (2), floor and
the cab tilting device may result.
8. Remove bolt (1) and cover (2).
9. Remove bolt (3). Loosen bolt (4) and remove cover (5).
OPTIONAL ATTACHMENT
CAB TILTING MECHANISM
13-27
1
3
ZX33U-5A, 38U-5A
1
3
ZX48U-5A, 55U-5A, 65USB-5A
Ground
Level
MADB-13-045
5
2
MADB-13-018
5
2
MADB-13-019
4
4
Advertisement
Table of Contents
