Table of Contents
Advertisement
SETTING THE BACKLIGHT TIME
The backlight illuminates the display for enhanced viewing. The default setting is 10
seconds. If Button Control is chosen the backlight button on the key pad will act as
an on/off switch and the backlight will remain on or off when the meter is being used.
When one of the other settings – 10, 20 or 30 seconds – is chosen, the display will be
illuminated for the specifi ed amount of time after any button is pressed.
NOTE: The backlight feature uses a signifi cant amount of power. The longer the
backlight is on, the more frequently the battery will have to be charged if the USB/Wall
Adapter is not being used.
1. From the Editing Menu, press
or
Backlight Time.
2. Press
ENTER
to select Set
Backlight Time.
3. Press
or
desired option.
4. Press
ENTER
. The screen will
display Storing... for about 1
second and the meter will return
to the Editing Menu.
14
to scroll to
to scroll to
Editing Menu
Logging
Factory Setup
Set Power Save
Set Backlight Time
12:00:00
001/500
Set Backlight Time
Button Control
10 seconds
20 seconds
30 seconds
12:00:00
001/500
Set Backlight Time
Button Control
10 seconds
20 seconds
30 seconds
12:00:00
001/500
Editing Menu
Logging
Factory Setup
Set Power Save
Set Backlight Time
12:00:00
001/500
COD3 Plus Colorimeter 10.18
Advertisement
Table of Contents
