Table of Contents
Advertisement
HYDRAZINE
p-DIMETHYLAMINOBENZALDEHYDE METHOD • CODE 3656-01-SC
QUANTITY
CONTENTS
2 x 60 mL
*Hydrazine Reagent A
10 g
Hydrazine Reagent B Powder
1
Pipet, 1.0 mL, plastic
1
Spoon, 0.15 g, plastic
*WARNING: Reagents marked with an * are considered to be potential health hazards.
To view or print a Safety Data Sheet (SDS) for these reagents go to www.lamotte.com.
Search for the four digit reagent code number listed on the reagent label, in the
contents list or in the test procedures. Omit any letter that follows or precedes the four
digit code number. For example, if the code is 4450WT-H, search 4450. To obtain a
printed copy, contact LaMotte by email, phone or fax.
Emergency information for all LaMotte reagents is available from Chem-Tel:
(US, 1-800-255-3924) (International, call collect, 813-248-0585).
Hydrazine, N
H
, is added to the water in high pressure boilers to reduce corrosion by
2
4
acting as an oxygen scavenger.
APPLICATION:
RANGE:
MDL:
METHOD:
SAMPLE HANDLING &
PRESERVATION:
INTERFERENCES:
COD3 Plus Colorimeter 10.16
Water and boiler water, industrial waste water.
0.00–1.00 ppm Hydrazine
0.01 ppm
p-Dimethylaminobenzaldehyde reacts with hydrazine
under acidic conditions to form a yellow color in proportion
to the amount of hydrazine present.
Samples should be analyzed as soon as possible after
collection due to the ease with which hydrazine becomes
oxidized. Acidifi cation of the sample may increase the time
between collection and analysis.
The substances normally present in water do not interfere
with the test, with the exception of strong oxidizing agents.
CODE
*4841-H
4842-D
0354
0727
Hydrazine
Advertisement
Table of Contents
