Table of Contents
Advertisement
5. Insert the blank into the
chamber. Close the lid.Press
to scan the blank. The
ENTER
screen wil display Scan Blank
Blank Done for about 1 second
and then return to the test
menu.
6. Insert the reacted sample into
the chamber. Close the lid. Press
to scan the sample. The
ENTER
screen will display Scan Sample
Sample Done for about 1
second. The result will appear on
the screen.
To repeat the test, press
to scan the sample again. The
last blank scanned is used by the
colorimeter for repeated scans.
A diff erent blank can be used by
pressing
to Scan Blank and then scanning
another blank. Scroll with
and make another selection
with
. The %T or Absorbance
ENTER
of the last test can be viewed by
scrolling down and choosing %T/Abs.
Press
to escape to previous
EXIT
menus.
NOTE: The menus loop in this screen
so either
the menu selection needed.
COD3 Plus Colorimeter 10.18
ENTER
or
to scroll
or
or
will lead to
007 Ammonia-N LRS
Scan Blank
Scan Sample
12:00:00
001/500
007 Ammonia-N LRS
1.00
ppm
Scan Blank
Scan Sample
12:00:00
001/500
007 Ammonia-N LRS
1.00 ppm
Scan Bank
Scan Sample
12:00:00
001/500
7
Advertisement
Table of Contents
