Safety - Husqvarna CG 200 Operator's Manual

Type plate
CG200
220-240V~ IPX3
XXX XXX XXXrpm
S/N: YYY WWWXXXXX
HUSQVARNA AB, SE-561 82 HUSKVARNA, SWEDEN
MADE IN CHINA
1. Voltage power supply
2. Water proof
3. Nominal engine output
4. Frequency
5. Rotations per minute
6. Gross vehicle weight
7. Manufacturing date, year, week, serial number
8. Product number
Product liability
Before leaving our factory every product passes an
exacting inspection programme in which everything is
checked minutely. Following the instructions will ensure
that your product gives long service, in normal operating
conditions.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the operator's manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
130 - 003 - 18.08.2017
XXXkW XXXHz
XXXkg
P/N: XXX XXX XXX

Safety

The manufacturer declines all responsibility for loss or
damage resulting from misuse or any modification,
alteration or powering that does not conform to the
manufacturer's original specifications.
The user advice and spare parts mentioned in this
document are given as an indication, and do not
constitute an undertaking. No warrantee will be granted
in the event of errors or omissions, or for damage
occurring during delivery, or caused by the design or
use of the product. We are very concerned about the
quality of our products and we reserve the right to make
any technical modifications to improve them, without
warning.
General safety instructions
WARNING: Please read the operator's
manual carefully and make sure you
understand the instructions before using the
product.
WARNING: Please read the engine
operation manual that is supplied with the
engine and make sure you understand the
instructions before using the product.
The product is designed to provide safe and reliable
service in operating conditions corresponding with the
instructions, but it can present dangers for the user and
risks of damage, consequently regular on site inspection
is necessary to ensure:
5