Machine´s Safety Equipment; General; Power Button; Stop/Run Switch - Husqvarna PG 680 Operator's Manual

Floor grinder/polisher
Hide thumbs Also See for PG 680:
Table of Contents

Advertisement

Available languages

Available languages

General

WARNING! Never use a machine with
!
faulty safety equipment. The machine's
safety equipment must be checked and
maintained as described in this section.
If your machine fails any of these checks
contact your service agent to get it
repaired.
This section describes the machine's safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly.

Power button

This button, when depressed, will turn on power supply to
the unit when the EMERGENCY STOP button has been
released.
POWER
STOP
STOP
RESET
Checking the power button
Check that the emergency stop button is not pressed
by turning it clockwise.
Press the power button. On doing so, a soft 'clunk"
should be heard to come from within the electrical
cabinet. This indicates the line contactors have
engaged, supplying power to the drives/frequency
converters.
Press the emergency stop.
MACHINE´S SAFETY EQUIPMENT
RUN
Turn the stop/run switch to "RUN".
POWER
STOP
STOP
RUN
RESET
The machine must not start.

Stop/run switch

The Stop/run switch is used to turn the engines on and off.
POWER
STOP
STOP
RUN
RESET
English
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pg 820

Table of Contents