Control Panel Terminology; The Local Keypad; Rcu Control Panel Terminology - Barco R9000901 Owner's Manual

Location and Functions of Control

Control panel terminology

GRAPHICS
1
EXIT
2 ADJ
3
ENTER
4
STBY PAUSE TEXT
5
0 -
9
SHARPNESS
7 -
8
6
TINT
6
5 -
COLOR
3 4
-
BRIGHTNESS
1 2
-
CONTRAST
ENTER : to start up the adjustment mode or to confirm an
9
adjustment or selection in the adjustment mode.
EXIT : to leave the adjustment mode or to scroll upwards
10
when in the adjustment mode.
2-2
12
stand-by
11
10 pause/park
9
sharpness
8
tint
color
+
7
brightness
+
+
contrast
+
+
32c
a. The Local Keypad
Getting Access
The local keypad is underneath the top cover door with the BARCO
logo.
To open this door, push as indicated on drawing and turn it to the
front side of the projector.
This local keyboard has the same functions as the Remote Control
Unit (RCU)
b. RCU control panel terminology
This remote control includes a battery powered infrared (IR) trans-
mitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation
and set-up. It includes automatic storing of :
- picture controls (Brightness, Sharpness,....)
- picture geometry adjustments
- convergence adjustments
Other functions of the remote control are:
- switching between standby and operational modes
- switching to "pause" (blanked picture, full power for immediate
restarting)
- direct access to all connected sources
- variable adjustment speed : when pushing continuously on the
control stick or the picture keys, the adjustment will be executed in an
accelerated fashion.
Back light key : when activated, all keys will be lit up and
1
visible in the dark.
2 ADJ. : adjust key, to enter or exit the adjustment mode.
Address key (recessed key), to enter the address of the
3
projector (between 0 and 9).
followed by pressing one digit button between 0 and 9.
STBY : stand by button :
4
- to initiate remote power up operation
- to stop projection without main power off.
Pause :to blank the image, press PAUSE. The image
5
disappears but full power is retained for immediate restarting.
Digit buttons : direct input selection.
6
Picture controls : use these buttons to obtain the desired
7
level (see also 'Controlling') for each picture function.
TEXT : when adjusting one of the image controls during a
8
meeting, the displayed bar scale can be removed by pressing
'TEXT' key first. To re-display the bar scale on the screen,
press 'TEXT' key again. 'TEXT' key is only active in opera-
tional mode. When 'TEXT' is off, no warning message will be
displayed.
Control stick key : to make menu selections when in the
11
adjustment mode. Also allows to increment or decrement
an adjustment in the adjustment mode.
control stick forward = up arrow in the menus
control stick backward = down arrow in the menus
control stick to the right = arrow to the right on the menus
control stick to the left = arrow to the left on the menus
RC operating indication : lights up when a button on the
12
remote control is pressed. (This is a visual indicator to
check the operation of the remote control)
5975007 BARCOGRAPHICS 808S 090996
Press the address key,