Uplift Desk TOP314 Instructions

Crafting table top

Masking tape or Painter's tape should be strong enough to keep drawers and hatches

closed, while also being gentle enough to not damage or gum up your Craft Tabletop's

wood surface. Do NOT use other types of tape, such as Scotch or Duct tape.

Package Contents

NOTE

Crafting Table Top

TOP314

Craft Table Top

Open your box and dispense of its cardboard and packaging. Take a

moment to put some masking tape on the drawers and lids, so they

stay closed while moving, flipping over, and assembling your desk.

If you do not use tape, loose drawers and lids may open suddenly,

possibly damaging the table or causing injury.

Place some towels or a blanket on the floor to protect the Table.

Have a friend or two help you place the Table upside down on the

blanket, so that the screw holes are facing up.

Get ready to attach the desk frame to the Table. Make sure the frame

is assembled as per its instructions before you begin. Line up your

desk's frame with the pre-drilled holes with threaded inserts on the

Table, and attach using the #10-24x5/8'' Machine Screws that came

with the frame.

If you have further questions regarding assembly of your UPLIFT

Desk frame, refer to those instructions.

TOP314/R01

Table of Contents

Do you have a question about the TOP314 and is the answer not in the manual?

Page 1 Table, and attach using the #10-24x5/8’’ Machine Screws that came with the frame. If you have further questions regarding assembly of your UPLIFT Desk frame, refer to those instructions. © UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com TOP314/R01...
Page 2 © Copyright Notice: These instructions are a component of the Crafting Table. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.