Table of Contents
Advertisement
14
How to Disassemble and Clean
01. Unplug the power cord with dry hands after
the unit has been completely stopped.
02. Remove the chamber set from the main body.
Twist the chamber cover to open and lift up the
parts in order to disassemble the unit.
03. Use a cleaning brush and wash the chamber
set under running water.
04. Open the control lever (
) and juice
cap to wash the chamber.
05. Wipe the main body with a damp towel or a
soft cloth.
06. The silicone packing can be disassembled and
washed. (Including juice cap packing, chamber
packing, silicone brush)
07. Soak in water diluted with one or two drops of
baking soda or natural bleach for dishes for about
30 minutes to sterilize and clean.
Note
If the unit is not cleaned immediately after use, a residue
may dry and stick to the unit. This will make disassem-
bling and cleaning difficult as well as lead to perfor-
mance degradation.
Please wash the unit immediately after use. Do not wash
with hot or boiling water, an iron scrubber, abrasive
material, sink solvents, or sharp cleaning tools.
Do not put it in a dishwasher or dish dryer. After wash-
ing, thoroughly and naturally dry, and store in a clean
area.
Advertisement
Table of Contents
