Table of Contents
Advertisement
14
How to Disassemble and Clean
01. Unplug the power cord with dry hands after the
unit has been completely stopped.
02. Remove the chamber set from the main body.
Twist the hopper to open and lift up the parts in order
to disassemble the unit.
03. Use a cleaning brush and wash the chamber set
under running water.
04. Open the control lever (
wash the chamber.
05. Wipe the main body with a damp towel or a soft
cloth.
06. The silicone packing can be disassembled and
washed. (Including juice cap packing, chamber
packing, silicone brush)
07. Soak in water diluted with one or two drops of
baking soda or natural bleach for dishes for about 30
minutes to sterilize and clean.
※ Please thoroughly wash the Chamber and its packing
hole with running water after separating the Chamber
Packing.
If the unit is not cleaned immediately after use, a residue may dry and stick to the unit. This will make
disassembling and cleaning difficult as well as lead to performance degradation.
Please wash the unit immediately after use. Do not wash with hot or boiling water, an iron scrubber,
note
abrasive material, sink solvents, or sharp cleaning tools. Do not put it in a dishwasher or dish dryer.
After washing, thoroughly and naturally dry, and store in a clean area.
) and juice cap to
Advertisement
Table of Contents
