How To Disassemble And Clean - HUROM wilfa ANDANTE Operating Instructions Manual

22

HOW TO DISASSEMBLE AND CLEAN

1. Unplug the power cord with dry hands
after the unit has been completely
stopped.
2. Remove the chamber set from the
main body. Twist the chamber cover to
open and lift up the parts in order to
disassemble the unit.
3. Use a cleaning brush and wash the
chamber set under pouring water.
4. Open the control lever to open position
and juice cap to wash the chamber
5. Wipe the main body with a damp towel
or a soft cloth.
6. The silicone packing can be
disassembled and washed. (Including
juice cap packing, chamber packing,
silicone brush)
7. Soak in water diluted with one or two
drops of baking soda or natural bleach
for dishes for about 30 minutes to
sterilize and clean.
Important
1. If the unit is not cleaned immediately after use, residues may dry and stick to
the unit. This will make disassembling and cleaning difficult as well as lead to
performance degradation.
2. Do not wash with hot or boiling water, an iron scrubber, abrasive material, sink
solvents, or sharp cleaning tools. Do not put it in a dishwasher or dish dryer.
After washing thoroughly let it dry naturally and store it in a clean area.
When cleaning the chamber set, wash the
residues inside of the chamber first. Then
disassemble the chamber packing and wash
under pouring water.
How to Clean
How to Clean