How To Disassemble And Clean - HUROM H-200 Series Instruction Manual

9. How to Disassemble and Clean

10
4DC010798 사용설명서 통합 H200 Serise 영문_V.01.indd 10
※
After the product stop operating completely,
unplug the power cord with your dry hands.
The motor is still slowing down after the
appliance is turned off, so wait about 3 seconds
before separating the chamber.
01 Separate the chamber set from the base. Turn
the hopper open and pull off the parts in order.
02 Wash the parts under running water with the
cleaning brush.
03 Wash the chamber with the pulp outlet cover
and the juice cap wide open.
04 Wipe the base with a dry towel or soft cloth.
05 For silicon rings, detach and wash them after
use. -There may be juice residues stuck in.
(Hopper ring, juice cap, extraction cap, sealing,
and chamber ring)
06 You can sterilize the parts by soaking them in
warm water with baking soda, citric acid, or
vinegar.
※ Clean the appliance right after use. Otherwise, it
will be harder to disassemble parts and clean off dry
residue inside, and it may also cause performance
impairment. For long-term storage, clean the
appliance with the cleaning brush in advance.
Do not clean the product with boiling water or subject it
to high temperature.
Do not use abrasive cleaning tool like kitchen sink
cleaner, or stainless-steel sponge.
Do not use a dishwasher or dish dryer for the product.
After cleaning, completely air dry the appliance and
store it at a clean place.
2020-01-28 오후 3:21:56