It may cause a fire, electric shock, injury and/or malfunction. For after-sales service and maintenance P.03 2. Precautions During Use of a product, contact the HUROM Customer Service P.04 3. Power Switch Guide / Center. When the power plug is damaged, do not repair or 4.
small amount or add them with other ingredients When using the product, be careful so that a tie, after soaking them in water. long necklace, scarf, etc. doesn’t get into the inlet. Ingredients unable to be juiced Place this product on an even and stable surface - Do not insert ingredients that cannot be juiced such for use.
4. Precautions Before Juicing 3. Power Switch Guide ※ If you have an allergy, make sure to select Press the operation switch for operation. proper ingredients for your body when preparing the ingredients. ※ For the method of and notes on using the device for each ingredient, please refer to the recipe book.
Page 6
4-1. How to Prepare Ingredients • As certain ingredients need extra care during Soft fruits preparation, please refer to the following instructions on how to prepare the ingredients. Single extraction (berries, cherry tomatoes, • When juicing several times or in bulk, make sure to pineapples, etc.) ※...
5. How to Assemble 01 01 ④ ④ ④+⑤ ④+⑤ ⑦ ⑦ ⑤ ⑤ ①-1 ②-1 ②-3 ②-3 ⑦-4 ⑦-4 ⑦-2 ⑦-2 ⑧ ⑧ ④ ⑤ 01 01 Assemble the fine strainer ( ) and rotation brush ( ) as shown in the figure. Push it all the way in. ⑦...
6. Assembly and Disassembly of Silicone ※ Silicone packings are consumables that are recommended to be replaced once every 6 to 12 months. Hopper Packing They are available for purchase through the Customer Service Center. (The juicer may leak if the product is not assembled properly.) Extraction Packing Assemble the packing as shown in the figure.
When the Screw Stops during Operation 01 01 01 Open the hopper cover. ① P ress the lever of the hopper cover to open it. 작동스위치 정회전 Overloading the product with ingredients may 역 회 전 damage the product. 정회전...
9. How to Disassemble and Clean ※ After the product stops operating completely, pull the power cord plug with dry hands. Even after the product is stopped, the motor will slowly come to a stop so wait about 3 seconds before detaching the chamber set.
10. Before Requesting Repair Check the following before asking for repair. For follow-up service and any inquiry you may have while using the product, please contact our Customer Center, or homepage at http://www.globalhurom.com Check the manufacturer’s number or the number under the barcode when requesting for follow-up service or parts. 01.
Need help?
Do you have a question about the H320N Series and is the answer not in the manual?
Questions and answers