Table of Contents
Advertisement
How to Clean
Clean the parts
1.
Unplug the power cord with dry hands after
the unit has been completely stopped.
2.
Remove the chamber set from the main body.
Twist the hopper to open and lift up the parts
in order to disassemble the unit.
3.
Use a cleaning brush and wash the chamber
set under running water.
4.
Open the control lever (
cap to wash the chamber
5.
Wipe the main body with a damp towel or a
soft cloth.
6.
The silicone packing can be disassembled and
washed. (Including juice cap packing, chamber
packing, silicone brush)
7.
Soak in water diluted with one or two drops
of baking soda or natural bleach for dishes for
about 30 minutes to sterilize and clean.
※ When you clean the chamber set, wash the
residue inside of the chamber first. And then
disassemble the chamber packing and wash it
under running water.
1.
If the chamber is not cleaned immediately after use, a residue may dry and stick to the
unit. This will make disassembling and cleaning difficult as well as lead to performance
degradation. Please wash the chamber set immediately after use.
NOTE
2.
Do not wash with hot or boiling water, an iron scrubber, abrasive material, sink solvents, or
sharp cleaning tools. Do not put it in a dishwasher or dish dryer. After washing, thoroughly
and naturally dry, and store in a clean area.
14
) and juice
Advertisement
Table of Contents
