Download
Share
Print this page
  1. Manuals
  2. Brands
  3. E+E Elektronik Manuals
  4. Transmitter
  5. EE040
  6. User manual

E+E Elektronik EE040 User Manual

Miniature humidity and temperature transmitter
Hide thumbs
1
2

Advertisement

Quick Links

Download this manual
USER GUIDE
EE040 – Miniature Humidity and Temperature Transmitter

SCOPE OF SUPPLY

EE040 according to the ordered type number, with mounting flange included.
CAUTION
• Avoid strong mechanical stress onto the device and mainly onto its front-end (filter side).
• Do not attempt to open the EE040 enclosure.
• For accurate measurement it is of paramount importance to avoid temperature gradients along the device. This is particularly
relevant when installing the device into a separation wall between zones with different temperature. In such a case make sure
to thermally isolate the back-end (connector side) of the device looking out of the wall.

CONNECTION DIAGRAM

DIMENSIONS in mm (inch)
only for duct mount
with lateral opening
35.1
(1.38")
38.6
(1.52")
43.2
(1.7")
52 (
2.05")
MAINTENANCE
A clogged filter leads to long response time.
Periodical check of filter is recommended, especially in case of installation in polluted environment.
If cleaning of filter is necessary, plug off the device and clean the filter with soft brush.
Do not clean the filter with pressurized water.
Optional connecting cable:
- 2 m
(HA010305)
(6.6 ft)
- 5 m
(HA010306)
(16.4 ft)
60
(2.36")
48
(1.89")
Ø 24
(0.94")
13
(0.51")
3
(0.12")

Advertisement

loading

Related Manuals for E+E Elektronik EE040

Summary of Contents for E+E Elektronik EE040

  • Page 1: Scope Of Supply

    USER GUIDE EE040 – Miniature Humidity and Temperature Transmitter SCOPE OF SUPPLY EE040 according to the ordered type number, with mounting flange included. CAUTION • Avoid strong mechanical stress onto the device and mainly onto its front-end (filter side). • Do not attempt to open the EE040 enclosure.

  • Page 2: Technical Data

    The accuracy statement includes the uncertainty of the factory calibration with an enhancement factor k=2 (2-times standard deviation). The accuracy was calculated in accordance with EA-4/02 and with regard to GUM (Guide to the Expression of Uncertainty in Measurement). 2) EE040 is not protected against surge EMC note USA (FCC): This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.