Table of Contents
Advertisement
Name
① Screw hopper
② Front: rail mounting screw
③ Rear: rail mounting screw
④ Bit guide plate adjustment screw
⑤ Bit guide front/rear mounting screw
⑥ Bit guide up/down mounting screw
⑦ Power switch
⑧ Rail
⑨ Stopper
⑩ Vibration frequency control dial
⑪ Amplitude control dial
⑫ Timer control dial
*The machine will stop feeding screws when they fill up the rail.
⑬ DC jack
Explanation
Insert screws to be used
Used when replacing rails
Used when replacing rails
Adjust to suit screw driver bit size
Adjust to suit screw size
Adjust to suit height of screw head
• When replacing the rail, raise the bit guide before removing and inserting the rail.
Turns the power on and off.
Set the rail to suit screw size
Stops the screws at the front of the rail
Control the vibration frequency using a precision screw driver.
Control the a amplitude using a precision screw driver.
Control the screw feeding (stop) time using a precision screw driver.
Connects to the supplied AC adapter
- 4 -
Advertisement
Table of Contents
