HIOS HSF-10 Instruction Manual page 14

4-7 Checking and adjusting the bit guide
• Check and adjust the position of the bit guide.
• Make adjustments while repeatedly taking screws out.
• When making adjustments, loosen the various adjustment screws.
• Refer to image 14 for the location of various adjustment screws.
Adjusting the bit guide
• The height of the bit guide can be adjusted with the bit guide height
adjustment screws. Ensure that the guide does not hit the holding plate.
• The groove width and front/rear position of the bit guide should be adjusted
to meet the holding plate groove using the plate adjustment screws and bit
guide front/rear mounting screws.
• When making this adjustment, line up the screw driver bit with the bit guide
(Image 15), and adjust the bit guide plate so that the bit moves smoothly.
Bit guide Plate
Plate adjustment screw
- 13 -
Bit guide
Front/rear mounting
screw
Bit guide
Up/down
adjustment
screw
Image 14
Image 15