Specifications - HIOS HSF-10 Instruction Manual

Specifications

9.
Specifications
Power
(AC adapter)
Dimensions
Weight
Screw capacity
CD-ROM 1, AC Adapter 1 unit
Following
Hexagonal Wrench 1 piec, Screwdriver 1 piece
accessories
Ground Wire 1 piece
Reference table of the specified screws
Type of
Screw
Screw
Unit
Feeder
size
Mode
HSF-10 M1.0
HSF-12 M1.2
HSF-14 M1.4
HSF-01
HSF-17 M1.7
HSF-20 M2.0
HSF-23 M2.3
HSF-26 M2.6
HSF-02
HSF-30 M3.0
Notes:
2
* Please consult your distributor for Flat head.
-Check if the axis diameter of the loaded screw corresponds with the above rail groove width.
-To change the nominal diameter of loaded screw, replace it with a part that is mentioned in the above table.
-The rail, escaper, stopper assembly, escaper guide-right and passing plate are optional.
-The design, performance and specifications are subject to change without prior notice for the sake of improvement.
1
Sems, W-Sems, head with washer face can be used with the HSF series as long as those are within the specifications in the table above.
-*
Input:AC100V-240V 50/60Hz
Output: DC 15V 1A
Refer to external view
Approx. 2.4kg (including screw rail)
Approx.40cc (cubic measure)
Screw Screw
Washer
Shaft Head
diameter
diameter diameter
(∅)
(∅) (∅)
0.9 - 0.95 1.2 - 2.0
1.1- 1.15 1.4 - 2.3
1.3 - 1.4 1.7 - 2.5
1.6 - 1.7 2.0 - 3.0
1.9 - 2.1 2.4 - 4.0 2.4 - 6.0
2.2 - 2.4 2.7 - 4.0 2.7 - 7.0
2.5 - 2.7 3.0 - 4.5 3.0 - 7.5
2.9 - 3.2 3.5 - 5.5 3.5 - 8.0
Rail replacement guide
Type of Unit
HSF-01
HSF-02
Screw
Screw
head
thick- length
ness
(mm)
(mm)
0.35 - 1.0 1.6 - 10
0.35 - 1.0 1.8 - 10
－
0.35 - 1.0 2.0 - 10
0.35 - 1.0 2.3 - 10
0.35 - 1.3 2.6 - 10
0.35 - 1.5 2.9 - 10
0.35 - 1.7 3.2 - 10
0.35 - 2.0 3.6 -10
- 25 -
Order Cord (depends on screw size)
HS-WR10, HS-WR12, HS-WR14, HS-WR17, HS-WR20
HS-WR23, HS-WR26, HS-WR30
Shape of screw head
Pan Bing Flat
head *2
head *1
ding
－ －
○
○ ○ ○
HEX.
Counter head
sunk with
head washer
face
－
－
○ ○