Danfoss ERC 213 Installation Manual page 9
Digital controller for refrigeration and defrost, 3 relays
Hide thumbs
Also See for ERC 213:
- Installation manual (9 pages) ,
- Quick start manual (5 pages) ,
- User manual (36 pages)
Advertisement
Available languages
Available languages
5 - Quick Configuration via "cFg" Menu
y
Press SET for three seconds to access the parameters groups.
y
Select "CFg" menu and press SET to enter. The first menu "r12" (main switch) is displayed.
y
Switch OFF main switch (r12=0) for changing the pre-installed application.
y
Press UP/DOWN to scroll through the parameter list.
y
Configure the "o61" parameter to select a pre-installed application
- Press SET to access the "o61" parameter.
- Press UP/DOWN to select an application (AP0= no application selected).
- Press SET to confirm, "o61" is displayed.
y
Continue to set the next parameters ("o06" sensor type) in the "cFg" menu.
DKRCE.PI.RL0.G7.ML
Installation Guide | ERC 213
| 9
Advertisement
Need help?
Do you have a question about the ERC 213 and is the answer not in the manual?