Danfoss ERC 213 Installation Manual page 7
Digital controller for refrigeration and defrost, 3 relays
Hide thumbs
Also See for ERC 213:
- Installation manual (9 pages) ,
- Quick start manual (5 pages) ,
- User manual (36 pages)
Advertisement
Available languages
Available languages
Quick Configuration at Power Up
y
STEP 4: Select sensor type "o06"
The display automatically shows sensor selection parameter "o06".
Press SET to select the sensor type.
The display shows the default value (eg. "n10" flashing).
Choose sensor type by pressing UP/DOWN (n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000) and press SET to
confirm.
NOTE: All sensors must be the same type.
DKRCE.PI.RL0.G7.ML
Installation Guide | ERC 213
| 7
Advertisement
Need help?
Do you have a question about the ERC 213 and is the answer not in the manual?